RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards

["Tony " <tonylist@wwwbiz.com>]

Ok here's an confirmed update. At this time all Prism 2.0 and 2.5 cards
do not report noise level. So when looking at the readings the only
valid one is the signal level.  I have requested a change to Configure
to gray out the S/N and noise readings much like they did with the WEP
on the Prism cards as not to confuse people.


Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider