Karlnet
[Top] [All Lists]

RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards

To: <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards
From: "Tony " <tonylist@wwwbiz.com>
Reply-to: karlnet@WISPNotes.com
Date: Tue, 18 Jun 2002 12:36:23 -0400
List-post: <mailto:karlnet@WISPNotes.com>
Dan 

Yes this looks like what we have seen. But if you look at the other side
of the link, with a lucent card, did the power signal go up? If should
have about 4-5dBm.

Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider


-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Dan Metcalf
Sent: Tuesday, June 18, 2002 10:13 AM
To: 'karlnet@WISPNotes.com'
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards


Tony,


What do you think about this?

http://wirelessbroadbandsystems.hypermart.net/100mw.htm

Dan Metcalf
Wireless Broadband Systems
dan.metcalf@wbsysnet.com
781-658-2075
www.wirelessbroadbandsystems.com

-----Original Message-----
From: Tony [mailto:tonylist@wwwbiz.com]
Sent: Tuesday, June 18, 2002 9:33 AM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards

Bill

To be clear the cards themselves outside of Karlnet have been work great
with no problems, many of the cards are being used in standard 801.11b
mode.

Also from talking to customers, many not on the lists, I know of about
25 using them in an RG-1000 or AP-1000. Out of the 25, 4 have had
problems 1 being a bad card. I whish I had a way of doing further
testing on the code but this is limited to KN engineers. I hope we'll
have further refinements for the Prism cards in the next release.

Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider


-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Bill Fisher
Sent: Tuesday, June 18, 2002 8:56 AM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards


> Bill
>
> The cards do work with TC but the reporting info is not 100% again 
> this is how TC communicates with the cards, the cards themselves work 
> great. And when not being using with TC do report the correct 
> information.

They don't work great Tony.  They make the AP-1000 lock up about 10% of
the time, which has been observed by at least 2 other people on this
list.  When I purchased them from you, you indicated that they did work
with Turbocell. There were no disclaimers mentioned.  The whole idea for
me was to use these in AP-1000s.

Bill

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet


<Prev in Thread] Current Thread [Next in Thread>