Karlnet
[Top] [All Lists]

RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards

To: "'karlnet@WISPNotes.com'" <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards
From: Dan Metcalf <danm@suncorstainless.com>
Reply-to: karlnet@WISPNotes.com
Date: Tue, 18 Jun 2002 10:48:02 -0400
List-post: <mailto:karlnet@WISPNotes.com>
The remote side is an rg1000 running v4.02, with 9v POE, I have another
rg1000, w/ v3.88 12v POE and the readings are good

Dan Metcalf
Wireless Broadband Systems
dan.metcalf@wbsysnet.com
781-658-2075
www.wirelessbroadbandsystems.com

-----Original Message-----
From: Dan Metcalf [mailto:danm@suncorstainless.com]
Sent: Tuesday, June 18, 2002 10:13 AM
To: 'karlnet@WISPNotes.com'
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards

Tony,


What do you think about this?

http://wirelessbroadbandsystems.hypermart.net/100mw.htm

Dan Metcalf
Wireless Broadband Systems
dan.metcalf@wbsysnet.com
781-658-2075
www.wirelessbroadbandsystems.com

-----Original Message-----
From: Tony [mailto:tonylist@wwwbiz.com]
Sent: Tuesday, June 18, 2002 9:33 AM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards

Bill

To be clear the cards themselves outside of Karlnet have been work great
with no problems, many of the cards are being used in standard 801.11b
mode.

Also from talking to customers, many not on the lists, I know of about
25 using them in an RG-1000 or AP-1000. Out of the 25, 4 have had
problems 1 being a bad card. I whish I had a way of doing further
testing on the code but this is limited to KN engineers. I hope we'll
have further refinements for the Prism cards in the next release.

Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider


-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Bill Fisher
Sent: Tuesday, June 18, 2002 8:56 AM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards


> Bill
>
> The cards do work with TC but the reporting info is not 100% again
> this is how TC communicates with the cards, the cards themselves work
> great. And when not being using with TC do report the correct
> information.

They don't work great Tony.  They make the AP-1000 lock up about 10% of
the time, which has been observed by at least 2 other people on this
list.  When I purchased them from you, you indicated that they did work
with Turbocell. There were no disclaimers mentioned.  The whole idea for
me was to use these in AP-1000s.

Bill

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

<Prev in Thread] Current Thread [Next in Thread>