Geroge
What version of SOHO SR-4000 or SR-4100? Also the RG is plugged
directly into the Netgear/Linksys router with a cross over cable?
Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Open Chat Server http://www.demarctech.com:8000
Yahoo IM: tonymorella
Wireless Solution Provider
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com
> [mailto:karlnet-admin@WISPNotes.com] On Behalf Of George Minich
> Sent: Saturday, November 23, 2002 3:09 PM
> To: karlnet@WISPNotes.com
> Subject: [Karlnet] Netgear or Linksys with 4.27 SOHO
>
>
> Hello all,
>
> I am testing a 4.27 SOHO on an RG-1100. I have bridging
> enabled (no NAT) and have assigned a private address
> (192.168.1.X) to the RG for private access. The RG is
> sitting on a bridged wireless link which connects to my
> public IP network. Running NAT on my Netgear (Netgear has a
> public address), I cannot seem to see any real world machines
> (IP's). However, I can ping private (192.168.x.x) devices on
> the other side.
>
> I am using the Netgear to DHCP private addresses to the
> machines as well. For the life of me, I cannot see any public
> IP's behind the netgear. I can only see private - including
> the ones on the base side.
>
> Any help would be greatly appreciated.
>
> Thanks
>
> George
>
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
>
|