Karlnet
[Top] [All Lists]

RE: [Karlnet] Netgear or Linksys with 4.27 SOHO

To: <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] Netgear or Linksys with 4.27 SOHO
From: "Demarc \(tony\) 908-996-7995" <tonylist@wwwbiz.com>
Reply-to: karlnet@WISPNotes.com
Date: Sun, 24 Nov 2002 00:04:11 -0500
List-post: <mailto:karlnet@WISPNotes.com>
Good deal ;)

Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Open Chat Server http://www.demarctech.com:8000
Yahoo IM: tonymorella
Wireless Solution Provider


> -----Original Message-----
> From: karlnet-admin@WISPNotes.com 
> [mailto:karlnet-admin@WISPNotes.com] On Behalf Of George Minich
> Sent: Saturday, November 23, 2002 11:07 PM
> To: karlnet@WISPNotes.com
> Subject: Re: [Karlnet] Netgear or Linksys with 4.27 SOHO
> 
> 
>   HA HA.  I should have known better.  I  double checked the 
> Netgear that my assistant installed.  The RG was connected to 
> one of the regular 10/100 switch ports! DOH!  I suppose you 
> get what you pay for.... :-(
> 
> Thanks
> 
> ----- Original Message -----
> From: "Demarc (tony) 908-996-7995" <tonylist@wwwbiz.com>
> To: <karlnet@WISPNotes.com>
> Sent: Saturday, November 23, 2002 6:50 PM
> Subject: RE: [Karlnet] Netgear or Linksys with 4.27 SOHO
> 
> 
> > George
> >
> > You don't have NAT our routing on the RG correct?  Also if you plug 
> > directly into the RG does it work??
> >
> > Sincerely
> > Tony Morella
> > Demarc Technology Group
> > Office: 908-996-7995
> > Cell: 908-246-9170
> > Fax: 908-847-0202
> > email: tony@demarctech.com
> > http://www.demarctech.com
> > Open Chat Server http://www.demarctech.com:8000
> > Yahoo IM: tonymorella
> > Wireless Solution Provider
> >
> >
> > > -----Original Message-----
> > > From: karlnet-admin@WISPNotes.com 
> > > [mailto:karlnet-admin@WISPNotes.com] On Behalf Of George Minich
> > > Sent: Saturday, November 23, 2002 5:29 PM
> > > To: karlnet@WISPNotes.com
> > > Subject: Re: [Karlnet] Netgear or Linksys with 4.27 SOHO
> > >
> > >
> > >   Hi Tony,
> > >
> > >   it is an SR-4100 SOHO.  I am able to communicate with 
> RG through 
> > > the Netgear since I was able to config the Karlnet 
> parameters.  It 
> > > just does not seem to NAT for some reason. The funny 
> thing is that I 
> > > could ping 192.168.1.x devices on the other end of the RF 
> link.  Any 
> > > ideas?
> > >
> > > Thanks
> > >
> > > George Minich
> > >
> > > P.S.  I called you a couple of weeks ago and we played 
> telephone tag 
> > > for a bit.  I am going to require some of your Demarc 
> enclosures.  
> > > I'll call you on Tuesday when I get back to the office.
> > >
> > > ----- Original Message -----
> > > From: "Demarc (tony) 908-996-7995" <tonylist@wwwbiz.com>
> > > To: <karlnet@WISPNotes.com>
> > > Sent: Saturday, November 23, 2002 4:57 PM
> > > Subject: RE: [Karlnet] Netgear or Linksys with 4.27 SOHO
> > >
> > >
> > > > Geroge
> > > >
> > > > What version of SOHO SR-4000 or SR-4100?  Also the RG 
> is plugged 
> > > > directly into the Netgear/Linksys router with a cross 
> over cable?
> > > >
> > > > Sincerely
> > > > Tony Morella
> > > > Demarc Technology Group
> > > > Office: 908-996-7995
> > > > Cell: 908-246-9170
> > > > Fax: 908-847-0202
> > > > email: tony@demarctech.com
> > > > http://www.demarctech.com
> > > > Open Chat Server http://www.demarctech.com:8000
> > > > Yahoo IM: tonymorella
> > > > Wireless Solution Provider
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: karlnet-admin@WISPNotes.com 
> > > > > [mailto:karlnet-admin@WISPNotes.com] On Behalf Of 
> George Minich
> > > > > Sent: Saturday, November 23, 2002 3:09 PM
> > > > > To: karlnet@WISPNotes.com
> > > > > Subject: [Karlnet] Netgear or Linksys with 4.27 SOHO
> > > > >
> > > > >
> > > > > Hello all,
> > > > >
> > > > >   I am testing a 4.27 SOHO on an RG-1100.  I have
> > > bridging enabled
> > > > > (no NAT) and have assigned a private address
> > > > > (192.168.1.X) to the RG for private access.  The RG is
> > > sitting on a
> > > > > bridged wireless link which connects to my public IP network. 
> > > > > Running NAT on my Netgear (Netgear has a public address),
> > > I cannot
> > > > > seem to see any real world machines (IP's).  However, 
> I can ping 
> > > > > private (192.168.x.x) devices on the other side.
> > > > >
> > > > >   I am using the Netgear to DHCP private addresses to the
> > > machines
> > > > > as well. For the life of me, I cannot see any public IP's
> > > behind the
> > > > > netgear.  I can only see private - including the ones on the 
> > > > > base side.
> > > > >
> > > > >   Any help would be greatly appreciated.
> > > > >
> > > > > Thanks
> > > > >
> > > > > George
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Karlnet mailing list
> > > > > Karlnet@WISPNotes.com 
> > > > > http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> > > > >
> > > >
> > > > _______________________________________________
> > > > Karlnet mailing list
> > > > Karlnet@WISPNotes.com 
> > > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > > >
> > > >
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com 
> > > http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> > >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com 
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
> 
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com 
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> 


<Prev in Thread] Current Thread [Next in Thread>