Karlnet
[Top] [All Lists]

Re: [Karlnet] Netgear or Linksys with 4.27 SOHO

To: <karlnet@WISPNotes.com>
Subject: Re: [Karlnet] Netgear or Linksys with 4.27 SOHO
From: "George Minich" <gminich@toshiba.ca>
Reply-to: karlnet@WISPNotes.com
Date: Sat, 23 Nov 2002 17:29:24 -0500
List-post: <mailto:karlnet@WISPNotes.com>
  Hi Tony,

  it is an SR-4100 SOHO.  I am able to communicate with RG through the
Netgear since I was able to config the Karlnet parameters.  It just does not
seem to NAT for some reason.  The funny thing is that I could ping
192.168.1.x devices on the other end of the RF link.  Any ideas?

Thanks

George Minich

P.S.  I called you a couple of weeks ago and we played telephone tag for a
bit.  I am going to require some of your Demarc enclosures.  I'll call you
on Tuesday when I get back to the office.

----- Original Message -----
From: "Demarc (tony) 908-996-7995" <tonylist@wwwbiz.com>
To: <karlnet@WISPNotes.com>
Sent: Saturday, November 23, 2002 4:57 PM
Subject: RE: [Karlnet] Netgear or Linksys with 4.27 SOHO


> Geroge
>
> What version of SOHO SR-4000 or SR-4100?  Also the RG is plugged
> directly into the Netgear/Linksys router with a cross over cable?
>
> Sincerely
> Tony Morella
> Demarc Technology Group
> Office: 908-996-7995
> Cell: 908-246-9170
> Fax: 908-847-0202
> email: tony@demarctech.com
> http://www.demarctech.com
> Open Chat Server http://www.demarctech.com:8000
> Yahoo IM: tonymorella
> Wireless Solution Provider
>
>
> > -----Original Message-----
> > From: karlnet-admin@WISPNotes.com
> > [mailto:karlnet-admin@WISPNotes.com] On Behalf Of George Minich
> > Sent: Saturday, November 23, 2002 3:09 PM
> > To: karlnet@WISPNotes.com
> > Subject: [Karlnet] Netgear or Linksys with 4.27 SOHO
> >
> >
> > Hello all,
> >
> >   I am testing a 4.27 SOHO on an RG-1100.  I have bridging
> > enabled (no NAT) and have assigned a private address
> > (192.168.1.X) to the RG for private access.  The RG is
> > sitting on a bridged wireless link which connects to my
> > public IP network. Running NAT on my Netgear (Netgear has a
> > public address), I cannot seem to see any real world machines
> > (IP's).  However, I can ping private (192.168.x.x) devices on
> > the other side.
> >
> >   I am using the Netgear to DHCP private addresses to the
> > machines as well. For the life of me, I cannot see any public
> > IP's behind the netgear.  I can only see private - including
> > the ones on the base side.
> >
> >   Any help would be greatly appreciated.
> >
> > Thanks
> >
> > George
> >
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>


<Prev in Thread] Current Thread [Next in Thread>