John
This will work but you need to have router on the wired side if there
will be more then 5 MAC. For example you do not want SOHO 2 plugged into
a switch as it will only take the first 5 MAC associations and that's
it. With a router in the mix SOHO 2 will only see the MAC of the
router, you could even use SOHO (1) for this setup.
Sincerely, Tony Morella
Demarc Technology Group, A Wireless Solution Provider
Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202
http://www.demarctech.com
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com
> [mailto:karlnet-admin@WISPNotes.com] On Behalf Of John Benson
> Sent: Thursday, December 19, 2002 9:01 PM
> To: karlnet@WISPNotes.com
> Subject: [Karlnet] SOHO vs. Sat
>
>
> I am installing Camera behind a wireless link and linking it
> back to an existing network where it will go out a T1 line.
>
> Camera ---> #1 SOHO RG ---> #2 SOHO or Sat RG ---> Wired
> Network, camera traffic will go out a a T1 to the internet
> relay server.
>
> If the #1 SOHO RG is in Satellite mode and the #2 SOHO or Sat
> RG is in base mode, can #2 be a SOHO or does it have to be a
> Satellite. There are multiple computers on the Wired Network.
>
> John
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
>
|