yes to everything, except that the KarlNet boards are G series licenses
so SR-4200 = SG-4200
-Charles
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Norm Young
Sent: Monday, August 04, 2003 10:43 AM
To: Karlnet Mailing List
Subject: [Karlnet] SR-4200
I have a need for four wireless interfaces at a WIPOP (expanding from the
existing two). One is going to be used for PtP backhaul, two for PtMP, and
one for further expansion. I was considering using the flashrom and a MB,
but it seems that only three wireless interfaces are possible in that
configuration. So, I'm wondering if I can hook a WPBASE+ to the existing
AP-1000, and perhaps run SR-4200 on it. Thus two wireless interfaces on
the AP-1000, and two on the WPBASE+.
Seems to me that SR-4200 supported two wireless interfaces (in addition to
an Ethernet port), but I'm not sure if this is true.
I'm also wondering if it would be better to run SR-4200 on the existing
AP-1000 and use the WPBASE+ for the PtMP using the base software. Which
brings up the question, is it possible to shift the base license from the
AP-1000 to a WPBASE+?
Norm
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|