Re: [Karlnet] who wants CB3 TC client?

["Bruno Lopes F. Cabral" <bruno@openline.com.br>]

Hi

is this CB3 device this one?

http://www.senao.com.tw/english/product/product_wireless01_outdoor_1.asp?tp1id=02&tp2id=02&proid=000026
http://www.netgate.com/Spec/802.11b-Prism2.5/2611CB3PLUS.pdf

where did you find it for US$112?

you can count on me on this group by from karlnet also

Cheers
!3runo
from Brazil

Blair Davis wrote:
> For those of you who don't know much about the CB3, here are it's high 
> points.....
>
> 200mW radio with ext. RP-TNC connector (with 3db omni)
> nice plastic case that can be set on a desk or in an antenna box
> 12V DC power supply for direct connection
> POE on board (use a standard injector, $12 or so, with it's standard 
> power supply for up to 150 ft or 50m)
> under $90USD in quantity and $112USD in single units.
>
> The point of this is that we could have a high powered TC client for 
> $140USD or so.
>
> The only issue with the units was that the JTAG header on the PC board 
> was not installed, but, per Karlnet support, a clamp could be made to 
> get around this.
>
> Another point is that Karlnet might not want to deal with flashing the 
> units.  If so, we would happy to work out a deal with Karlnet to do this.
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet