I still see IP Freeze w/ v4.46, over 1000 retransmits within a minute or
two to a single CPE while the rest of the CPE's get NO activity
Ryan Free wrote:
If anyone would like to see screen shots of the "IP Freeze" at work on an
STG graph feel free to contact me off list. Very interesting to see how a
graph can help depict an issue at hand. I also have a small write up as
well.
Thanks,
Ryan Free
Network Consultant
OnlyInternet.Net Broadband & Wireless
www.oibw.net
Broadband Dpt. (800)363-0989
Desk: (800)363-4881 Ext. 2487
Nextel: (260)307-0018
-----Original Message-----
From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]
On Behalf Of karlnet-request@WISPNotes.com
Sent: Wednesday, December 08, 2004 8:06 PM
To: karlnet@WISPNotes.com
Subject: Karlnet Digest, Vol 24, Issue 6
Send Karlnet mailing list submissions to
karlnet@WISPNotes.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.wispnotes.com/mailman/listinfo/karlnet
or, via email, send a message with subject or body 'help' to
karlnet-request@WISPNotes.com
You can reach the person managing the list at
karlnet-owner@WISPNotes.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Karlnet digest..."
Today's Topics:
1. RE: 4.46 released (Blair Davis)
2. RE: RE: 4.46 released (Guillermo Bricaire)
3. RE: 4.46 released (Rick Harnish)
4. RE 4.46 - WaveLan II BNC (Rick Snider)
5. Upgrading to 4.46 - Remotely (Rick Snider)
6. RE: RE: 4.46 released (Dzevad Hadzic)
7. 4.46 test (Brenden Cooper)
8. Re: RE: 4.46 released (Caleb Carroll)
9. How do you ppl check noise floor (Dzevad Hadzic)
----------------------------------------------------------------------
Message: 1
Date: Wed, 08 Dec 2004 12:21:50 -0500
From: Blair Davis <blair@wmwisp.net>
Subject: [Karlnet] RE: 4.46 released
To: karlnet@WISPNotes.com
Message-ID: <41B7382E.6030701@wmwisp.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I am using 4.46 on my AP-1000E / Wavepoint II-E units. No special
problems found so far.
DON'T try to put 4.46 on an AP-1000 / Wavepoint II (units with the BNC
connector) unless you want to go replace / reload the unit. It WILL
cause the unit to lock up.
Preparing to load 4.46 on my flashroms and on my OR-500 / OR-2 and
RG-1x00 units later today.
Blair Davis
West Michigan Wireless ISP
269-686-8648
A Division of :
Camp Communication Services, INC
------------------------------
Message: 2
Date: Wed, 8 Dec 2004 09:48:57 -0800
From: "Guillermo Bricaire" <gbricaire@bricaire.com>
Subject: RE: [Karlnet] RE: 4.46 released
To: <blair@wmwisp.net>, "'Karlnet Mailing List'"
<karlnet@WISPNotes.com>
Message-ID: <000601c4dd4e$3ecd0e30$6401a8c0@wiwo>
Content-Type: text/plain; charset="iso-8859-1"
Thanks for that info!!
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Blair Davis
Sent: Miircoles, 08 de Diciembre de 2004 09:22 a.m.
To: karlnet@WISPNotes.com
Subject: [Karlnet] RE: 4.46 released
I am using 4.46 on my AP-1000E / Wavepoint II-E units. No special
problems found so far.
DON'T try to put 4.46 on an AP-1000 / Wavepoint II (units with the BNC
connector) unless you want to go replace / reload the unit. It WILL
cause the unit to lock up.
Preparing to load 4.46 on my flashroms and on my OR-500 / OR-2 and
RG-1x00 units later today.
Blair Davis
West Michigan Wireless ISP
269-686-8648
A Division of :
Camp Communication Services, INC
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
------------------------------
Message: 3
Date: Wed, 8 Dec 2004 12:54:51 -0500
From: "Rick Harnish" <wireless@onlyinternet.net>
Subject: RE: [Karlnet] 4.46 released
To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
Message-ID: <200412081754.iB8Hss4x002640@smtpgw.onlyinternet.net>
Content-Type: text/plain; charset="us-ascii"
I have been using the beta 4.46 release for six months. I have had very
few
issues with it since we uploaded it. I went from having about 4 IP
freezes
a day to maybe 1 per month. We plan to start transitioning our older
firmware to the new release over the course of the next few weeks.
Rick Harnish
President
OnlyInternet Broadband & Wireless, Inc.
260-827-2482 Office
www.oibw.net
rharnish@oibw.net
MSN: r_harnish62@hotmail.com
ICQ: 293578162
Founding Member of WISPA
-----Original Message-----
From: Dzevad Hadzic [mailto:zex@zex.biz]
Sent: Tuesday, December 07, 2004 8:35 PM
To: 'TerabeamTechnical Services'; 'Karlnet Mailing List'
Subject: RE: [Karlnet] 4.46 released
Did anybody tested 4.46 ?
Btw seems that terabeam website is very long time down...
------------------------------
Message: 4
Date: Wed, 8 Dec 2004 12:24:20 -0600
From: "Rick Snider" <rick@snider.org>
Subject: [Karlnet] RE 4.46 - WaveLan II BNC
To: <karlnet@WISPNotes.com>
Message-ID: <FIEJKNBFHPMNGAPPNMADMELGDBAA.rick@snider.org>
Content-Type: text/plain; charset="iso-8859-1"
Where Can I download a release for AP1000 TurboCell
ISP Binary that will work -- I have trashed two of these units
by trying to load 4.45 and was told to wait for 4.46 --- now
it looke like I need to locate an older Bin file like a 4.43
Also If I pull a new License Key from License It -- based on the Mac
Address -- will it work with the older binary?
If not who can provide me with working binary - license key combination.
Rick Snider, PE
Hillcountry Networks
Texas Rural Internet Engineering
------------------------------
Message: 5
Date: Wed, 8 Dec 2004 12:35:43 -0600
From: "Rick Snider" <rick@snider.org>
Subject: [Karlnet] Upgrading to 4.46 - Remotely
To: <karlnet@WISPNotes.com>
Message-ID: <FIEJKNBFHPMNGAPPNMADAELIDBAA.rick@snider.org>
Content-Type: text/plain; charset="iso-8859-1"
Is there a safe way to do remote upgrades to KN105 and RG-1100 boards over
the radio link?
I assume loading in a Config File to the Bin before downloading would
work.
But is there
a supported way to remotely upgrade the Bin to these boards?
Rick Snider, PE
Hillcountry Networks
Texas Rural Internet Engineering
------------------------------
Message: 6
Date: Wed, 8 Dec 2004 21:57:44 +0100
From: "Dzevad Hadzic" <zex@zex.biz>
Subject: RE: [Karlnet] RE: 4.46 released
To: <blair@wmwisp.net>, "'Karlnet Mailing List'"
<karlnet@WISPNotes.com>
Message-ID: <20041208205754.4A8F4F2806@paris.akorn.net>
Content-Type: text/plain; charset="us-ascii"
Did you upgrade your unit's and is everyhintg ok?
-----Original Message-----
From: Blair Davis [mailto:blair@wmwisp.net]
Sent: Wednesday, December 08, 2004 6:22 PM
To: karlnet@WISPNotes.com
Subject: [Karlnet] RE: 4.46 released
I am using 4.46 on my AP-1000E / Wavepoint II-E units. No
special problems found so far.
DON'T try to put 4.46 on an AP-1000 / Wavepoint II (units with the BNC
connector) unless you want to go replace / reload the unit.
It WILL cause the unit to lock up.
Preparing to load 4.46 on my flashroms and on my OR-500 /
OR-2 and RG-1x00 units later today.
Blair Davis
West Michigan Wireless ISP
269-686-8648
A Division of :
Camp Communication Services, INC
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
------------------------------
Message: 7
Date: Thu, 9 Dec 2004 09:01:29 +1100
From: "Brenden Cooper" <brenden@megalink.com.au>
Subject: [Karlnet] 4.46 test
To: <karlnet@WISPNotes.com>
Message-ID: <004201c4dd71$795e4280$c85d20cb@s>
Content-Type: text/plain; charset="us-ascii"
I have put on the 4.46 vision on to a base that had a big problem with
lock ups.
So far so good, it hasn't lock up since installed.
Brenden
Megalink Aust
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com] On Behalf Of
karlnet-request@WISPNotes.com
Sent: Thursday, 9 December 2004 4:01 AM
To: karlnet@WISPNotes.com
Subject: Karlnet Digest, Vol 24, Issue 5
Send Karlnet mailing list submissions to
karlnet@WISPNotes.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.wispnotes.com/mailman/listinfo/karlnet
or, via email, send a message with subject or body 'help' to
karlnet-request@WISPNotes.com
You can reach the person managing the list at
karlnet-owner@WISPNotes.com
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Karlnet digest..."
Today's Topics:
1. RE: 4.46 released (Dzevad Hadzic)
----------------------------------------------------------------------
Message: 1
Date: Wed, 8 Dec 2004 02:35:26 +0100
From: "Dzevad Hadzic" <zex@zex.biz>
Subject: RE: [Karlnet] 4.46 released
To: "'TerabeamTechnical Services'" <techsupport@terabeam.com>,
"'Karlnet Mailing List'" <karlnet@WISPNotes.com>
Message-ID: <20041208013540.85E83F285E@paris.akorn.net>
Content-Type: text/plain; charset="us-ascii"
Did anybody tested 4.46 ?
Btw seems that terabeam website is very long time down...
------------------------------
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
End of Karlnet Digest, Vol 24, Issue 5
**************************************
------------------------------
Message: 8
Date: Wed, 08 Dec 2004 17:36:53 -0700
From: "Caleb Carroll" <karlnet@pathcom.ca>
Subject: Re: [Karlnet] RE: 4.46 released
To: blair@wmwisp.net, "Karlnet Mailing List" <karlnet@WISPNotes.com>,
karlnet@WISPNotes.com
Message-ID: <200412081736530853.1B1F20EB@mail.pathcom.ca>
Content-Type: text/plain; charset="ISO-8859-1"
Read the bloody e-mail from Reg. It says:
***
Known Issue:
1) AP-1000 units with boot version 3.20 should not be upgraded to
versions
higher than 4.44-02.
***
AP-1000's with BNC connectors all have 3.20 boot prom.
*********** REPLY SEPARATOR ***********
On 2004-12-08 at 12:21 PM Blair Davis wrote:
I am using 4.46 on my AP-1000E / Wavepoint II-E units. No special
problems found so far.
DON'T try to put 4.46 on an AP-1000 / Wavepoint II (units with the BNC
connector) unless you want to go replace / reload the unit. It WILL
cause the unit to lock up.
Preparing to load 4.46 on my flashroms and on my OR-500 / OR-2 and
RG-1x00 units later today.
Blair Davis
West Michigan Wireless ISP
269-686-8648
A Division of :
Camp Communication Services, INC
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
------------------------------
Message: 9
Date: Thu, 9 Dec 2004 02:05:30 +0100
From: "Dzevad Hadzic" <zex@zex.biz>
Subject: [Karlnet] How do you ppl check noise floor
To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
Message-ID: <20041209010535.711F2F26F8@paris.akorn.net>
Content-Type: text/plain; charset="us-ascii"
I recently had problem with setuping long link ~20 miles. After setting up
units and mounting antennas on tower I was able to see other unit
In wireless link test but there was too much noise ( I fond this latter)
to
establish connection.
Only way witch comes to my mind was to setup one unit to 802.11 and use
netstumbler to check noise ratio and find low-noise channel.
If noise is too high link does not work and I can't see how much noise is
around with wireless link test.
This sounds to me like catch 22.
Is there some other way to check for noise ratio without establishing link
test ?
------------------------------
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
End of Karlnet Digest, Vol 24, Issue 6
**************************************
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet