> If I find out what config to put the host PC in using WinXP, I'll
> share it. There might be some software timing element w/ the loader
> that causes the dependency on hardware serial ports and perhaps
CPU
> speed, load and physical RAM available to the process.
You don't need to worry about it. T-T Update automatically puts the PC's
serial port (or USB/serial port) in the correct mode.
You don't need a hardware serial port. USB converted ports work just
fine. I posted in another email the converters I use from Calbes To Go,
which have been largely glitch free.
Grant/NQ5T
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|