[RFI] Touch Light Update #3

[Palomar Engineers <Palomar@compuserve.com> (Palomar Engineers)]

F50B-77 is 2400 mH/1000t so the 10 turns is 216 uH.  But 77 material is
quite lossy at 14 MHz and inductance is too high anyway. Better to use
about 15 turns on a T50-6 to get 1 uH with good "Q". -- If you are stuck
with the F50B-77 just slip it over the wire (one turn) to suppress the 14
MHz. -- Jack, K6NY, Palomar Engineers

--
FAQ on WWW:               http://www.contesting.com/FAQ/rfi
Submissions:              rfi@contesting.com
Administrative requests:  rfi-REQUEST@contesting.com
Questions:                owner-rfi@contesting.com