[Top] [All Lists]

Re: [RFI] Update on the Boston area RFI

To: thorntonash@comcast.net,RFI@contesting.com
Subject: Re: [RFI] Update on the Boston area RFI
From: Missouri Guy <n0tt1@juno.com>
Date: Sat, 13 Feb 2010 18:35:27 +0000
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
> NStar did come out last week with their Radar Engineering VHF/UHF  
> gear with a yagi for pinpointing the noise. The noise was so high  
> along the power lines they could not pinpoint a specific pole or 
> spot....

It sounds like they needed some attenuation in front of the
receiver.  With my own RFI radio, I use 6 -10 -20 db switchable
steps between the antenna and radio, and sometimes that's 
not enough when close to a noise source.

Charlie, N0TT
RFI mailing list

<Prev in Thread] Current Thread [Next in Thread>