RTTY
[Top] [All Lists]

[RTTY] 4U1VIC

To: <rtty@contesting.com>
Subject: [RTTY] 4U1VIC
From: thomask at grundlgasse.at (Thomas Korinek)
Date: Thu May 8 16:09:52 2003
Unfortunatly Jeff wk6i is right - at least according to the ARRL-rules.

The ARRL tells us that 4U1VIC counts for OE.
Just wonder why 4U1ITU does NOT count for HB???
And why 4U1UN does not count for W ???

The Vienna International Center definatly is NOT part of OE. It is
exteritorial !!!!

So since it is NOT austrian territory - why should  it count as OE ??? (Just
because a bunch of old mans = ARRL decided it that way ???) Ahh - to err is
human - so pse forgive me - ahh them ....

PSE Do us a favor:
If you want to get your DXCC send them a qsl-card from an OE-station NOT the
one from 4U1VIC  to get your credit for OE.

PS: I also have operated from 4U1VIC in the early 90?s. (Till we had cleaned
up the bands - then it became boring since nobody else needed a qso ...)

That?s all for now

73 de Tom - OE1KTS


----- Original Message -----
From: Jeff Stai WK6I <wk6i@twistedoak.com>
To: Roberto <ea2ry@ea2ry.com>; RTTY Reflector <rtty@contesting.com>
Sent: Thursday, May 08, 2003 7:43 PM
Subject: Re: [RTTY] 4U1VIC


> At 09:25 AM 5/8/2003, Roberto wrote:
> >Today i have received following qsl via bureau:
> >
> >4U1VIC - Vienna International Amateur Radio Club - United Nations in
Vienna
> >QSO1: SEP-1999 - RTTY - 15M
> >QSO2: NOV-2001 - CW - 15M
> >
> >This callsing is valued for 4U-ITU or 4U-UN ??????
>
> I have contacts with 4U1WB (World Bank) in Washington DC, which are
considered a US (K) contact.
>
> If this is an indication, then your QSL would be OE (Austria).
>
> Best to check with the DXCC desk to be sure - 73! - jeff wk6i
>
>
> Jeff Stai               jds@twistedoak.com
> Twisted Oak Winery      http://www.twistedoak.com/
> Rocketry Org. of CA     http://www.rocstock.org/
> Amateur Radio           WK6I
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>



<Prev in Thread] Current Thread [Next in Thread>