FYI. There is a motherboard that you can still get with ISA slots and run a
3gHz processor. I am not so sure how RITTY will run on that type of system,
but it is worth a try. The MB # is "SY-P4I 845PE ISA" manufactured by SOYO.
Last I checked the board is still available.
Tony - N2KI
SYSOP - N2KI DX CLUSTER
dxc.n2ki.com:7300
RF Gateway 145.650
Website: www.n2ki.com
DX Spoken Here
> -----Original Message-----
> From: rtty-bounces@contesting.com [mailto:rtty-
> bounces@contesting.com] On Behalf Of Bill Turner
> Sent: July 03, 2005 20:59
> To: kk5oq@bellsouth.net; rtty@contesting.com
> Subject: Re: [RTTY] RTTY Software
>
> At 03:24 PM 7/3/2005, Charles wrote:
> >Bill,
> > I run it under windows(95), so it will work with windows.
> >Works with WL also(.pif file). WL is ok but one of those multi-purpose
> >loggers so
>
> _________________________________________________
>
> Yes, I too have run RITTY under Windows 95, but it was in DOS mode.
> What I
> was referring to was running a Windows program such as WriteLog or
> N1MM
> Logger, using WinXP, and having RITTY do the demodulating. Have you
> been
> able to do that? If so, that's great. I haven't been able to, perhaps
> because my main computer does not have any ISA slots for the
> soundboard.
>
> --
> Bill, W6WRT
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.8.8/37 - Release Date: 7/1/2005
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|