Hi Wolf.
thanks for all.
What kind of a radio di you have?
I ask because I never have heard about a radio who sends DC to the rf
stages.
In the KAM+ Manual and in the arrl handbook, also in the manual for my
kenwood radio as well in the manual for the dxp38 modem I see the same thing
about the frequency from the transmitting starion.
Frequency sent = displayed frequencu +- the mark/shift tones. the plus or
minus depends if you send USB or LSB.
in my case 14.100 + 2125 = 14.102125 KHZ
also 14.097875 + 2125 = 14.100 khz
soundcards use different frequency but it can be calculated.
I was testing this with my friend tonight and it did work this way.
Me transmitting on 14.09787 KHZ and he did receve me on 14.100 KHZ
by doing revers FSK I had to use minus and get the other sideband.
regards robert tf3tty...... 73
----- Original Message -----
From: "Wolf (DL6JZ)" <dl6jz@t-online.de>
To: <rtty@contesting.com>
Sent: Tuesday, January 10, 2006 8:23 AM
Subject: Re: [RTTY] NAQP RTTY on NCDXF Beacon]
> Hi Robert,
>
> first, you must be a good RTTY-contester because we had a QSO in the
> Roundup. :-))
>
> Plus/minus 2 kHz is too much for the free space for the NCDXF beacon
> system. I think plus/minus 500 Hz will do it.
>
> I am running FSK. And when my radio shows 14100 kHz then my two tones
> will be at 14100kHz and 14099.830 kHz.
>
> Soundcard users who are running AFSK can configure their software to
> show the real mark frequency. So I think there should be no problem with
> transmitting in a forbidden area.
>
> 73 + 55
> Wolf, DL6JZ
>
>
>
> -----Original Message-----
> Date: Mon, 9 Jan 2006 19:41:41 +0100
> Subject: Re: [RTTY] Fw: RE: NAQP RTTY on NCDXF Beacon]
> From: "robert"
> To: ,
>
> hi all.
> Those who use souncards or use FSK keying and set the rig to 14.100,
> where
> does the signal go.
> FSK shift is 2125/2295 for mark/space or 1275/1445 mark/space. When
> using
> soundcards this can be almost anywhere, I use 1100/1300 because it goes
> into
> the filters passband on my rig.
> The 2 KHZ safetyzone is the minium to set for us not to interfere with
> the
> beacon. It should be 2500 HZ. There are too many hams out there who
> don't
> know about this mark/space stuff.
> But on the other hand I wonder those who send/receve on the beacon
> frequency, don't they have interference from the beacon??
>
> regards & 73 tf3tty robert..
>
> p.s. I wonder how I am doing as a rtty contester!
> am I good or bad?
>
> c u all
>
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|