ORIGINAL MESSAGE:
At 05:41 AM 4/1/2006, Andrei Nevis wrote:
>That is interesting.
> My PRO-3 works Only when I mark 756 PRO in the Writelog Setup.
> I tried to mark all other Radios with all Baud rates - only PRO 3
> with 9600 Baud works.
> 73's Andrei EW1AR-NP3D
>
*********** REPLY SEPARATOR ***********
Did you also change the address in the radio? The default for the PRO
III is 6E. Try changing it to 66 and tell WriteLog it is an IC-746PRO
and it should work.
The baud rate is independent of the address.
73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|