The PRO III is added to the latest released version 10.58e which is available
on the Downloads page of the WriteLog website:
http://www.writelog.com/downloads.htm
I've been using the PRO II setting and changing the address in the radio to
match the PRO II. I've not tried the PRO III setting
yet as I'm still off the air with no radio connected.
73, Don AA5AU
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
Behalf Of Bill Turner
Sent: Friday, March 31, 2006 9:58 PM
To: Andrei Nevis; rtty@contesting.com
Subject: Re: [RTTY] WriteLog and IC-756PRO III
ORIGINAL MESSAGE:
At 07:40 PM 3/31/2006, Andrei Nevis wrote:
>I had to change address to 64 in order to make it work.
*********** REPLY SEPARATOR ***********
That did it. I changed the address on the radio to 66 and told WriteLog it was
an IC-746PRO. I remembered the address from when I
previously used one.
Many thanks,
73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|