RTTY
[Top] [All Lists]

Re: [RTTY] Calibration Check with W1AW RTTY Bulletin

To: "RTTY Reflector" <rtty@contesting.com>
Subject: Re: [RTTY] Calibration Check with W1AW RTTY Bulletin
From: "Bob" <rabisch@hotmail.com>
Date: Wed, 4 Mar 2009 21:26:06 -0500
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Thanks to Dick AA5VU and Richard VE3IAY for taking the time to answer my
question.  I was thinking there was something magical about a 2125 Hz tone
but that just sets the location of the Mark Freq in relation to your rigs
freq readout.  I guess that's why it doesn't really matter if you use LSB 
or USB just as long as you set the mark freq and then shift in the right 
direction.  I guess that's why there is a reverse button in most of the 
AFSK RTTY SW.

So if I want to set up a QSO on RTTY I just need to tell the other station
what freq my Mark will be on and let them do the addition or subtraction 
depending of their SW or rig. 

Thanks again

Bob
K4QHH 
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>