V19.22 1 December 2017
Check Partial and Super Check Partial (SCP) Window:
At times, and more frequently as QSO totals increased,
the SCP Window did not indicate that the call, or partial
call, on the logging line had already been worked. Fixed.
Dupe checking was not affected, but it helps to know
immediately if the call you're typing has the potential
to be a dupe.
When SCP is in effect, and there are many matches (for
example, DL), the display reverts temporarily to Check
Partial - showing matches from the log only.
The default is for SCP to be enabled. Use the SCP
command to toggle it.
EXPAND Command:
If you're serious about using Check Partial or SCP as an
operating aid, it is more efficient to have the partial
calls listed close to (underneath) the Callsign field on
the logging line rather than in the Score Window. This
way, head or eye movement is minimised.
In the Getting Started section of SD's manual, the standard
settings for SD's Windows Size is Width 82, and Height 27.
With EXPAND enabled, the Height should be set to 36, and
the Font Size reduced to make SD's expanded window fit your
screen.
If you haven't a clue about what all this means, try the
EXPAND command to see for yourself - and read "Getting
Started" in the manual.
FT991 Rig Control:
Fixed: Thanks GM4ZUK & G3WYW.
RSGB 1.8MHz Contest.
Fixed cosmetic display errors with pre-filled district
codes. District Codes are now pre-filled for UK stations
only. Pre-fills occur on a callsign match with a record
in .LST files loaded with the LOAD command. Any such
pre-filled code is cleared as characters are added to
the call, or the call is edited, such that there is no
longer a matching call in the .LST files.
ps - it seems to have worked - see the non-UK Unassisted
results at
www.rsgbcc.org/cgi-bin/hfresults.pl?Contest=2nd 1.8MHz Contest&year=2017
_________________________________________________
V19.22 is available from www.ei5di.com/sd/sdsetup.exe
If you find bugs, send the details to sduser@contesting.com
and send me your .ALL file.
Previous versions of SD are no longer supported, so please
confirm that any problem still exists in V19.22.
A reminder that SDX is a free DXpedition or Special-Event
logger for SSB and CW on the 10 bands from 160-6m.
www.ei5di.com/sdxsetup.exe
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|