Here is a man who uses he noggin. I like it.
Cecil
KD5NWA
----- Original Message -----
From: "Dudley Hurry" <jhurry@austin.rr.com>
To: "Mark Erbaugh" <mark@microenh.com>; "Bill Ames" <bames@aob.com>;
<tentec@contesting.com>
Sent: Thursday, April 11, 2002 8:55 AM
Subject: Re: [TenTec] Remote Pegasus
> Guys,
>
> Do like I do and use a good quality wireless mic and wireless headphones
for
> the audio signals.. Works great for 100 feet thru walls..
>
> Thanks and 73's,
> Dudley
> WA5QPZ
> jhurry@austin.rr.com
>
>
>
>
> ----- Original Message -----
> From: "Mark Erbaugh" <mark@microenh.com>
> To: "Bill Ames" <bames@aob.com>; <tentec@contesting.com>
> Sent: Wednesday, April 10, 2002 11:07 AM
> Subject: Re: [TenTec] Remote Pegasus
>
>
> > Bill,
> >
> > Thanks for the suggestion. However, the Pegasus does not have a line
> level
> > input. The input level on the ACCY jack is actually the same as for the
> Mic
> > input. Would it be good to boost the mic to line level at the mic end
and
> > then reduce it back to mic level at the Pegasus end?
> >
> > 73,
> > Mark
> >
> > ----- Original Message -----
> > From: "Bill Ames" <bames@aob.com>
> > To: "Mark Erbaugh" <mark@microenh.com>; <tentec@contesting.com>
> > Sent: Wednesday, April 10, 2002 11:39 AM
> > Subject: RE: [TenTec] Remote Pegasus
> >
> >
> > > I would suggest that you use a mixer or some such device at the remote
> end
> > > and then you can have a line level signal to feed to the line input. I
> > think
> > > you will have problems with long runs of the low level mic signals.
> > >
> > > Bill Ames
> > > KB1LG
> > >
.contesting.com/mailman/listinfo/tentec
|