TenTec
[Top] [All Lists]

[TenTec] Need help: Corsair II meter problem

To: <tentec@contesting.com>
Subject: [TenTec] Need help: Corsair II meter problem
From: k5uj@hotmail.com (Rob Atkinson, K5UJ)
Date: Mon Jun 30 10:05:40 2003
Hi everyone:

I was operating my Corsair II in FD over the weekend (at home) & was 
switching the front panel multimeter around to check forward power, swr and 
Ic.  I flipped the switch to Ic (was in receive mode) and the power supply 
tripped.  I turned off the rig, reset the p.s. and turned the rig back on.  
It seems to receive and tx okay (I went ahead and operated in field day with 
it) but the meter is nonfunctional.  On rx it does nothing for signal 
levels.  On tx it's dead on tx power, and swr (was running cw so don't know 
about processor but never use it anyway).  In receive, when I switch it over 
to Ic the meter slams against the left side.  Has anyone had this happen?  
Any ideas on what the problem might be?

Thanks & 73,

Rob Atkinson
K5UJ
k5uj@hotmail.com

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*  
http://join.msn.com/?page=features/virus

<Prev in Thread] Current Thread [Next in Thread>