TenTec
[Top] [All Lists]

[TenTec] Step size

To: tentec@contesting.com
Subject: [TenTec] Step size
From: "Ten-Tec Inc. Amateur Radio Sales" <sales@tentec.com>
Reply-to: tentec@contesting.com
Date: Mon, 12 Jul 2004 16:24:40 -0400
List-post: <mailto:tentec@contesting.com>
At 09:57 AM 7/12/04 -0400, you wrote:
Scott,

> -- VFO's are not receivers --

How does one define what is a property of the VFO and what is the property
of the receiver?

I would assume from the design that BW and PBT are functions of the receiver
that the VFO should be limited to frequency setting. If that is the case,
why does the tuning step size appear to be a function of the receiver?  In
fact this can result in some confusion (which tuning step size to use) when
both receivers are tied to the same VFO.

73,
Mark

Tuning step size is a function of receiver on the Orion, but really it should be considered as part of VFO - there was no elegant way to make the step size selectable per VFO on the radio. And sure, when they're both tied to one VFO it causes an overlap.

We had long discussions about what is receiver, what is VFO and how
each can be changed - and then it takes a lot of work to figure out what
will work logically and is user-friendly.

Scott Robbins, W4PA


-----------------------------------------------------------------
Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
Repair (865) 428-0364 8-4. Sales (800) 833-7373 9 am-5:30 pm.
Fax (865) 428-4483 24 hrs. Visit us at <http://www.tentec.com>
Email: New product sales/product info sales@tentec.com
Service department service@tentec.com
While we make every effort to answer email in an expedient manner,
the telephone is a much more efficient tool for getting a quicker and
more complete answer to your inquiries. Thanks!



_______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>