No experience with the pulser. I have looked at my Omni VI (version 3)
keying envelope with my Tektronix 466 storage scope while sending a
string of dits from a Logikeyer K-3, with no weighting added, at about
20 WPM and the dits appear close to 50% duty cycle. I'll try it at 40
WPM and get back to you. And I'll take a look at the Bird 43 too. If the
keying is good up to 30 WPM it will be good enough for my style of
operation, so far.
DE N6KB
>So if you bring your 'pulser' down below about 40 wpm, it
>should work.
>
>>anything less than 100% duty cycle
>>on the Key Pulser is about 10% of the full-scale (e.g.
>>key-down) wattmeter reading. I haven't put the Omni 6+
>>on my O'scope yet, but it sure seems like it is truncating
>>the pulses from the Key Pulser significantly compared to
>>the Paragon. The keying speed of the pulser is 48 WPM
>>with a variably duty cycle (50 msec pulse repetition rate,
>>0 to 100% duty cycle).
>>
>>
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|