TenTec
[Top] [All Lists]

Re: [TenTec] Argonaut V and an amplifier

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Argonaut V and an amplifier
From: Bob Scott <w4zy@bobandpenny.us>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 10 Oct 2006 16:17:26 -0400
List-post: <mailto:tentec@contesting.com>
Thank you Craig and the others for responding.

So the RF sensing switch takes the place of a keying control output that 
apparently does not exist in the Argo V?  Is that what the AL output 
is?  Have never used an amp before.

Thanks and 73,
Bob - W4ZY

K4IA@aol.com wrote:
>  
> In a message dated 10/10/2006 8:51:35 A.M. Eastern Standard Time,  
> k3miy@csonline.net writes:
>
> The  problem is that the V doesn't have an AL output.
>
>
> Neither does the Orion.  
>  
> And you'll need a RF sensing switch to put the amp into transmit mode.  
>
> k4ia
> Craig  "Buck"
> Fredericksburg, Virginia USA
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>   

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>