TenTec
[Top] [All Lists]

Re: [TenTec] Orion, V2x with WriteLog

To: "'Lee Armitage'" <LEE@GJ.NET>,"'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] Orion, V2x with WriteLog
From: "Duane Calvin" <ac5aa1@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 24 Jan 2007 22:53:01 -0600
List-post: <mailto:tentec@contesting.com>
Lee,
        That doesn't happen with WriteLog.  It correctly picks the RX VFO.
Works fine with DX4WIN also, setting and reading QSX frequencies (on my
Orion I).

        73, Duane

Duane Calvin, AC5AA
Austin, Texas
www.ac5aa.com  
 

-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Lee Armitage
Sent: Wednesday, January 24, 2007 10:32 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Orion, V2x with WriteLog

I use Prolog2K for Windows to log DX and general logging.

I notice that the Orion II gives the freq. to the Prolog2K program from VFO 
A because when I work split to call the DX and XMIT on VFO B, the program 
does not get any freq. information until I switch the TX back to VFO A.

Not a big deal, but it took me a while to figure out what was going on.

Lee Armitage N0LYW
Western Colorado

----- Original Message ----- 
From: "Duane Calvin" <ac5aa1@gmail.com>
To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Sent: Wednesday, January 24, 2007 8:29 PM
Subject: Re: [TenTec] Orion, V2x with WriteLog


> None that I'm aware of, Natan.  I run WriteLog, DX4WIN (and MMTTY) with my
> Orion all the time.  It plays very well.  Occasionally WriteLog seems to
> miss a beat in polling (once every 300+ QSO's in a contest if it's going 
> to
> happen at all) and causes either invalid band to be chosen or the bandmap
> window briefly shows an odd freq, then returns with a half second.  It's a
> very small nit, and easily seen and remedied afterwards.
>
> 73,  Duane
>
>
> Duane Calvin, AC5AA
> Austin, Texas
> www.ac5aa.com
>
> -----Original Message-----
> From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
> On Behalf Of Natan Huffman
> Sent: Wednesday, January 24, 2007 8:59 PM
> To: tentec@contesting.com
> Subject: [TenTec] Orion, V2x with WriteLog
>
> I'm expecting the arrival of an Orion  (not Orion II) with version 2.056
> firmware and am hoping to use it with Writelog.  Are there any known
> problems or suggestions when using Writelog and the Orion?
>
>
>
> Thank you from a new Ten Tec owner.
>
>
>
> Natan W6XR.
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>