Yes, I thought about that, but I haven't done the math. Actually, the
Scout has a 2.5 MHz PTO, but the second harmonic may cause trouble,
although there is a low pass filter on the PTO output.
73,
Bob WB2VUF
Dr. Gerald N. Johnson wrote:
> On Fri, 2007-07-13 at 22:26 -0400, Bwana Bob wrote:
>> Interesting...
>>
>> Those edge connectors look like standard spacing. In fact, they must be
>> because of the connector that they plug into. One could probably get
>> prototype blank boards with edge connectors like that.
>>
>> What I'd like to try is building a 60 meter module or modifying a 40
>> meter module to work on 60 meters, if I could get a spare 40 m module
>> (for less than $90!).
>>
>>
>> 73,
>>
>>
>> Bob WB2VUF
> Most tentec gear has a 5 MHz PTO and a 9 MHz IF, running RF at 5.3 MHz
> makes for lots of birdies in and out. Probably worse than the early 17
> meter setups where the 9 MHz IF doubled to put out a signal just outside
> the ham band.
>
> 73, Jerry, K0CQ
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|