TenTec
[Top] [All Lists]

Re: [TenTec] Low Pass Filter

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Low Pass Filter
From: "DAVID HELLER" <dtx@verizon.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 18 May 2008 01:07:52 -0400
List-post: <mailto:tentec@contesting.com>
Radiation from a feedline or from the antenna proper is radiaton, which is what a transmitter is supposed to be doing for a living. A good match is just supposed to increase the amount of transmitter output that actually gets where it can radiate; that which simply heats something along the way is just wasted. As for the RFI possibility I refer to the ARRL RFI book, and especially the article by me therein. The test: If there is one TV set (assuming it's TVI in question) in your home or the immediate vicinity that your station does NOT bother your rig is clean and anything you do to it will produce no improvement. The affected receivers are defective,most likely needing high pass filtering. Telephones and other devices that are either not supposed to be receivers or at worst VHF or UHF devices should know better than to listen to HF. One rule our Bucks Interference Committee,which I headed for many years, strictly enforced, was that we of the committee would never touch a complainant's device - TV or whatever, and we were emphatic in advising the involved amateurs to keep hands off, and generally keep clear and let the Committee do the dirty work. One of the worst sources of true RFI was the ubiqitous C,B, ,often assisted by the nonlinear amplifiers common to the breed. We stayed clear since our services were free and FCC had the opportunity to make money off them. Always amazing how 5 watts could raise so much problems while 100 watts or even a KW would bother no one.----- Original Message ----- From: "Jim WA9YSD" <wa9ysd@yahoo.com>
To: <tentec@contesting.com>
Sent: Saturday, May 17, 2008 2:38 PM
Subject: [TenTec] Low Pass Filter


Oak Bay use to make a pretty good one. Not sure if they still are making them. I have tried others with various affects. Oak Bay seamed to be most effective. .I feel there are other issues to deal with first. I no longer use them except for the internal low pass filters installed in my Ten-Tec radio equipment.


Keep The Faith, Jim K9TF/WA9YSD




_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


<Prev in Thread] Current Thread [Next in Thread>