The unit after the tuner may be subject to very high SWR unless your
antennas are all have fairly low SWR. A severe mismatch could cause voltage
or current sufficient to damage the second unit.
But like they say, "If it ain't broke, don't fix it"!
Ron N6IE
www.N6IE.com
----- Original Message -----
From: "Gary Hoffman" <ghoffman@spacetech.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Sunday, May 18, 2008 1:09 PM
Subject: Re: [TenTec] Low Pass Filter
I use two, and its probably overkill.
I use one before the linear, and then I use one that comes after the
antenna
tuner (and linear). I'd guess I get very little additional bang for the
buck that way, but it is also true that I have never caused any TVI.
73 de Gary, AA2IZ
|