Dell,
If you could send me the correct pin outs, it would be great. This kind of
has me stumped and the correct wiring has to help, since it will not work
with the incorrect wiring.
Thank you for your time.
Best,
DW Holtman
WB7SSN
----- Original Message -----
From: "Dell Ray" <ray_2098@yahoo.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Saturday, January 17, 2009 12:57 AM
Subject: Re: [TenTec] Ham Radio Deluxe
I use HRD and many others and all work FB. I use a standard RS-232 cable. I
have also made my own and worked OK. The Original manual shown the pin
assignments wrong for the cable. I have Instructions from TT to trouble
shoot the Serial Interface.
I have them saved as .JPGS. I'll send them to your email address if you
like. Not sure If you can attach to this forum.
Dell R Smith
Prosser,Wa
KI7XD DN-06
OMNI VI Opt1
--- On Fri, 1/16/09, DW Holtman <tubestuff@comcast.net> wrote:
From: DW Holtman <tubestuff@comcast.net>
Subject: [TenTec] Ham Radio Deluxe
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Date: Friday, January 16, 2009, 2:56 PM
Hello,
I recently aquired a Omni VI Plus and I wanted to know if
anyone uses Ham
Radio Deluxe with it. I cannot get it to communicate with
my computer. I
first tried using a DB-25 (Radio) to a DB 9 through a
Belkin serial to USB
adapter, no luck. Next I wired a DB-25 to DB-25 thinking
this set up did not
like the Balkin. Still no luck. I told HRD that I have a
IC-735 as per the
manual.
Any ideas? Thank you in advance.
Best,
DW Holtman
WB7SSN
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|