TenTec
[Top] [All Lists]

Re: [TenTec] Ham Radio Deluxe

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Ham Radio Deluxe
From: "Tim Heasman" <tim@sideswiper.plus.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 17 Jan 2009 14:29:50 -0000
List-post: <mailto:tentec@contesting.com>
Hi,

All you need to do is to swop over the connections to pins 2 and 3 at one of the cable.

I just turned around plug 72 on the logic board which made the cable work as the wiring diagram.

73

Tim

gm4lmh

----- Original Message ----- From: "DW Holtman" <tubestuff@comcast.net> To: <ray_2098@yahoo.com>; "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Saturday, January 17, 2009 1:46 PM
Subject: Re: [TenTec] Ham Radio Deluxe


Dell,

If you could send me the correct pin outs, it would be great. This kind of
has me stumped and the correct wiring has to help, since it will not work
with the incorrect wiring.

Thank you for your time.

Best,
DW Holtman
WB7SSN

----- Original Message ----- From: "Dell Ray" <ray_2098@yahoo.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Saturday, January 17, 2009 12:57 AM
Subject: Re: [TenTec] Ham Radio Deluxe


I use HRD and many others and all work FB. I use a standard RS-232 cable. I
have also made my own and worked OK. The Original manual shown the pin
assignments wrong for the cable. I have Instructions from TT to trouble
shoot the Serial Interface.
I have them saved as .JPGS. I'll send them to your email address if you
like. Not sure If you can attach to this forum.

Dell R Smith
Prosser,Wa
KI7XD DN-06
OMNI VI Opt1


--- On Fri, 1/16/09, DW Holtman <tubestuff@comcast.net> wrote:

From: DW Holtman <tubestuff@comcast.net>
Subject: [TenTec] Ham Radio Deluxe
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Date: Friday, January 16, 2009, 2:56 PM
Hello,

I recently aquired a Omni VI Plus and I wanted to know if
anyone uses Ham
Radio Deluxe with it. I cannot get it to communicate with
my computer. I
first tried using a DB-25 (Radio) to a DB 9 through a
Belkin serial to USB
adapter, no luck. Next I wired a DB-25 to DB-25 thinking
this set up did not
like the Balkin. Still no luck. I told HRD that I have a
IC-735 as per the
manual.

Any ideas? Thank you in advance.

Best,
DW Holtman
WB7SSN

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec




_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


<Prev in Thread] Current Thread [Next in Thread>