good luck. i know of no software that controls all radio functions in
Linux. SSH would allow you to be remote if the software has the
capabilities to do as you wish. 73 jack
on second thought, networking allows me to see all the programs and
files on my wife's Vista machine with Ubuntu. however i know of no way
to actually control the programs running in Vista from Ubuntu.
On Mon, 2009-07-27 at 07:31 -0400, Steve Halliburton wrote:
> Thanks, Jack, but the software I'm interested in is much
> more than logging. One Plug actually becomes the radio,
> including receive/transmit audio and everything else. The idea
> is to be at a remote location and be able to use the radio as
> if you were sitting in front of it. It works pretty well on a
> native Windows system, but I haven't yet found a way
> to run it under Linux.
> 73
> Steve WA2SOC
>
>
> jfriend31@comcast.net wrote:
> > i have been using xlog in Ubuntu 8.10. it reads my orion and the cw keyer
> > works wonderfully. xlog-2.0.3 has just been released by Joop and has
> > several bug fixes along with fixing the control keys in the cw keyer. i
> > highly recommend it for use Steve.
> >
> >
> >
> > you will need to go to the source to download xlog-2.0.3 in compressed
> > version, uncompress in the desired directory. read the INSTALL file and
> > follow the instructions there to install all dependencies, then
> > ./configure, make, make install.
> >
> >
> >
> > if you have installed all the dependencies it will be up and running
> > quickly.
> >
> >
> >
> > 73 jack
> >
> >
> >
> > ps the only connection to your rig is thru the supplied serial cable from
> > the rig. if your computer has no serial port, a serial to usb port adapter
> > works just fine. i have built a switch as shown in MixW of one transistor,
> > one diode and two resistors thru which xlog's keyer keys my orion. so for
> > cw you will need two connections to your radio, one for reading the radio
> > with hamlib and the other for keying cw. both work fine thru serial to usb
> > adapters.
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "Steve Halliburton" <wa2soc@hsix.com>
> > To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> > Sent: Sunday, July 26, 2009 6:12:54 AM GMT -07:00 US/Canada Mountain
> > Subject: [TenTec] One Plug under Linux
> >
> > Has anyone had any success with running the OMNI VII
> > One Plug software under Linux? I've tried some cross-hosting
> > solutions that claim to run VB under Linux, so far with no success.
> > I also set up a virtual WinXP machine under VirtualBox but the
> > networking software has such long latency that the audio is terrible
> > even with the network adapter in bridge mode. I really don't want
> > to have to have a separate computer to run Windows just so I can
> > use this one program. I'm still fiddling with the VirtualBox networking
> > in the hopes of finding a way to make it faster, but it would sure be
> > nice if somebody out there has already made this work.
> >
> > 73, Steve WA2SOC
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|