Gil:
The Corsair uses some diodes on the counter board to preset the counter,
depending on band. Check these, and the band information coming from the
band switch. Also check the ceramic bypass caps on the counter board. I
had a leaky cap in my Corsair that affected the display.
73,
Bob WB2VUF
g p wrote:
> Thanks to all the people here for helping me with the AGC problem, now that I
> got that working, thought I leave the best for last.
>
> The frequency display's mhz digits are off on most bands, for example the
> 3.5mhz band reads 1.500, the 7mhz band reads 5.000, the 10mhz band reads
> 18.000, the other bands are good. In other words the three last digits (khz)
> are accurate on all bands where the first (mhz) digits are off on the bands
> mentioned.
>
> This feels like a more complex issue to resolve but Im open to comments
>
> Gil
>
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|