Peter,
More likely that your friend had an issue with the download coincidental with
skipping a release and when he went back to do them in order they all
downloaded correctly, including the latest version with no error. There has
never been a serial rule in place that I am aware of, requiring you to
sequentially perform updates.
Still good advice to re-install the loads, and at the end of the day he ended
up with a good version of the final load installed, which was the objective.
73 - Steve W5JK
On Jun 18, 2010, at 1:22 AM, Peter Frenning wrote:
> tor, 17 06 2010 kl. 23:40 -0400, skrev Toby Pennington:
>
>> I just loaded version 2.044A and came from 2.039d. The rig automatically
>> did a master reset going from the old version to the new.
>>
>> I am experiencing the same thing as has been reported. If the BW on cw is
>> set to 400hz when the rig is booted up it will go to 500hz. On ssb, I can
>> set the BW to 2900hz and upon booting the rig up, the band width will go
>> immediately to 3000hz.
>>
>> I don't consider this a really big issue unless other perimeters are being
>> changed along with the receive CW and SSB BW.
>>
>> Toby W4CAK
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> Am I correct in assuming that you omitted the update from 2.039D to
> 2.043B and went directly from 2.039D to 2.044A?
> Someone I know had done that and had similar problems. On my advice he
> went through the whole uddate sequence (2.039D -> 2.043B -> 2.044A) and
> all has been well since that.
>
> Vy 73 de OZ1PIF/5Q2M, Peter
>
>
> *****************************************
> ** Genius is one per cent inspiration, **
> ** and ninety-nine per cent **
> ** perspiration. **
> ** -- Thomas A. Edison **
> *****************************************
> email: peter(no-spam filler)@frenning.dk
> http://www.frenning.dk/oz1pif.htm
> Ph. +45 4619 3239
> Snailmail:
> Peter Frenning
> Ternevej 23
> DK-4130 Viby Sj.
> Denmark
> *****************************************
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|