TenTec
[Top] [All Lists]

Re: [TenTec] Fwd: Model 715 question

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Fwd: Model 715 question
From: Richards <jruing@ameritech.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 27 May 2011 01:07:02 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Yeah!    I appreciate your take on the matter.

It is sorta odd that the HEIL headsets are almost never sold at the big 
broadcast supply houses...  I see Sennheiser, AudioTechnica, 
BeyerDynamic, AKG, Shure, Eartec, and Telex, to name a few I do see, 
instead.    It is a puzzlement why not, because they are of decent 
quality, and, in contrast, HEIL microphones ARE beginning to get LOTS 
more play at the supply houses... mostly for recording and interview 
purposes, and I think that is a result of Bob Heil's doing a much better 
marketing job lately.   Why the microphones seem to sell, but not the 
headsets, is a curiosity.    But the headsets don't seem to sell outside 
the ham world like their microphones do.

The only reason I don't have one is because my business associate and I 
once considered selling HEIL microphones about a decade ago.   Bob had a 
sales rep who outdid himself in both rudeness and arrogance, so we took 
a hike, and decided to sell Sennheiser gear, instead.   Nothing 
personal,  we just got hinky and hiked.   It was not because the gear 
was bad.    We were really liking the
PR-20 microphone.   It really is a good microphone, but we opted to sell the
Sennheiser 3-835 for $40 less, instead.   The Sennheiser rep was a 
pleasure to work with ...


By the way..

I HAVE SOME MONO  1/4 INCH  JACK to  1/8 INCH PLUGS ...

I can send ya one if you need it.   They seem harder to come by these 
days, as  most guys just use the three pole stereo adapters, and just 
ignore the ring (middle) connector.

Would that help you out ?

------------------
Happy Trails.
=======================  Richards / K8JHR  =========================

On 5/26/2011 22:00, David W LeJeune wrote:
> I have a Heil Pro Set Elite - comes with 1/8 inch plugs. Definitely designed
> for the broadcast industry, with flat response from 100hz to 12khz. One
> thing about them - you can find an adapter from 1/8 inch to quarter inch -
> either mono or stereo - haven't ever found the opposite - from 1/4 inch to
> 1/8 inch.
>
> Just and observation!
____________________________________________________________
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>