TenTec
[Top] [All Lists]

Re: [TenTec] 566 v3.028

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] 566 v3.028
From: Richards <jruing@ameritech.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 06 Apr 2012 01:00:09 -0400
List-post: <mailto:tentec@contesting.com>
Gee... that seems like a serious difference in output volume. The 707 is kinda soft for even a dynamic type microphone cartridge. A typical hand held performance type microphone has a sensitivity (at 1,000 Hz Open Circuit Voltage) typically like this:

Shure SM ......................-54.5 dBV/Pa (1.85 mV)
AudioTechnica  AT4100..... -55 dB (1.7 mV) re 1V at 1 Pa
AKG D5.........................-52 dBV / 2.6 mV/Pa

Thus, in my estimation, the Model 707 has a moderately low sensitivity rating. Of course, this makes it a good candidate for close talking, which tends to be more noise canceling (more like noise rejecting) because the volume of your voice is relatively high compared to the volume of ambient environmental sound, and that puts our voice, but not your fan noise, over the air.

Nonetheless, the specifications suggest the 707 has a relatively low output volume compared to similar microphones.

---------------------------  K8JHR  ------------------------------------


On 4/5/2012 3:02 PM, Rsoifer@aol.com wrote:


the output of the   707 is -78 dB   vs.   -52 dB for the 706

____________________________________________________

<Prev in Thread] Current Thread [Next in Thread>