I think perhaps you misunderstood. It sounds like there was an extra filter on
the input to block anything above 15m. Removing that would not necessarily
produce spurious emissions.
Best regards - Bry Carling
> On Feb 13, 2014, at 5:07 PM, Jim Brown <k9yc@audiosystemsgroup.com> wrote:
>
> SAY WHAT? The FCC Rules under which we operate REQUIRE that we suppress the
> harmonics produced by an output stage. That filter is there to suppress
> those harmonics, so replacing it with a wire means you're probably violating
> FCC Rules by a wide margin.
>
> That's something that you need to figure out right away. And you have no
> business using the radio on 15-10 M until you have done so.
>
> This is NOT CB radio -- WE are the techies.
>
> 73, Jim K9YC
>
>> On 2/13/2014 11:48 AM, Kris Merschrod wrote:
>> I did the mod from the schematic and parts that T-T sent on a perfboard - it
>> really isn't much, but, before hand, I pulled the 15 meter filter and put
>> in a jumper wire - it worked like a charm w/o the filter - I am not sure
>> what the harmonics on that looked like - others can do the hi-tech work :>)
>>
>> Kris
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|