TenTec
[Top] [All Lists]

Re: [TenTec] Lightning protection

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Lightning protection
From: Cecil <chacuff@cableone.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 14 May 2014 19:20:23 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>

Sent from my iPad

> On May 14, 2014, at 6:38 PM, "Bob McGraw - K4TAX" <RMcGraw@Blomand.net> wrote:
> 
> Ground?   Someone said use one for lightning protection.  Why?  All lightning 
> protection should be OUTSIDE of the house and never inside.  I operate from 
> the 2nd floor of the house.  No ground from the station to the outside is 
> ever.

> 73
> Bob, K4TAX
> 
I like you Bob......

But we will never agree on that one....

Too many documents and industry standards say and do otherwise....

First line of defense is definitely outside but not continuing that protection 
to a shack central point ground system with all equipment bonded too it and the 
building electrical safety ground system is only doing half the job...

It's the system design used in every Cellular/PCS/SCADA/Public Safety radio 
system out there....systems that have to run 24/7 lightning or not, all usually 
with 200'+ tower heights.

I'm sure Jim will hammer me next.....

Sorry guys...it's my training and vocation...building and maintaining these 
systems....why wouldn't one carry that philosophy as much as is practical into 
our stations...I have with excellent results.  My tower gets popped a couple 
times a year and no damage to anything.

Of course this has nothing to do with the Eagle RFI problem...but I felt 
compelled to comment.  (Changed the title so as to not hijack the thread)

Dead horse ....I know...

Cecil
K5DL

> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>