I had similar problem and found a couple of xtals were missing. Replaced the
missing xtals and still had problems on 10 meters . I found that reseating
the xtal w/ some deoxit took care of the problem. I agree if the jumper on
the back is missing it is probably the problem.
Ralph Howes
W8BVH
----- Original Message -----
From: "Tom Cooper via TenTec" <tentec@contesting.com>
To: <TenTec@contesting.com>
Cc: "Tom Cooper" <w1eat@yahoo.com>
Sent: Sunday, June 12, 2016 12:42 PM
Subject: Re: [TenTec] Omni D help needed
On the back of the older Omni radio there was a jumper used when no
external VFO was attached. If That jumper is missing you will have the
symptoms you describe.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|