Good advice from Don. Also, don't adjust anything until you first adjust
the BFO oscillator trimmer capacitors, described in the manual under TX
Audio Board.
Master oscillator adjustment is described here:
http://tentecwiki.eqth.net/doku.php?id=563calibrate
73, Barry N1EU
On Mon, Mar 12, 2018 at 1:05 PM, Don Rasmussen via TenTec <
tentec@contesting.com> wrote:
>
>
> Be sure to check that the difference is seen on all bands, band crystals
> also change sometimes...
> de Wb8yqj Don
> My 25 year old Omni VI+ has gradually crept up 100 hz on the readout. I
> have a
> new TCXO that I recently purchased but I would like to make an adjustment
> to
> bring the BEAUTY UP 100hz so it will read 3.925 instead of 3.924.9 when it
> is
> in fact receiving on 3.925.
> Thanks and 73, John, K5PGW
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|