My C22 arrived! I'm now the proud owner of model 579 #00068.
The radio and power supply were shipped separately. Despite a decent
packing effort by the seller, the USPS still managed to damage both
packages.
https://photos.app.goo.gl/HVtxjX8QK9Bdacxn7
Nothing too bad. Luckily the faceplate didn't get cracked. I just need to
straighten out the front plate. Same with one of the corners of the PS.
The receiver works. The PTO seems to work fine - is it normal for the freq
to change when you touch the tuning shaft? Never noticed this on my C21. I
will probably go ahead and clean / repack the PTO while I have everything
apart. This thing sat unused for decades, so that grease has to be getting
pretty dried out.
No output from the speaker, but I tracked that down to a broken wire in the
speaker. Will need a new speaker.
Some really bad soldering on the MRF476's - the base leg on one of them has
completely broken free from the board. Clearly someone who sucks as
soldering replaced them! Is it possible to test them in-circuit, or should
I de-solder and test?
The insides look clean. I gave the faceplate, switches, and cases a bath
and they cleaned up well.
https://photos.app.goo.gl/5csNkFgGXeAsgN1A9
One of the knobs is cracked. Anyone have a source for these? It's not the
same knobs that my C21 uses - I think it's the same as the Argosy and
possibly other models from the early 80s?
73,
-Josh WU7H
> <#m_2085694248949351549_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|