K1ZM@aol.com wrote:
So, I will probably go the PVC conduit route - it is EASY to pass RG213
through it as long as the PL259's are off the cable and the various sections can
either be taped or PVC glued together - very EASY to make this one work - just
takes time.
If the PVC conduit is the same type as is sold here, you can buy "collars" that
are a push-fit to join sections, with a central flange to hold the conduit in
position. There are also right-angle bends, inspection elbows, and all sorts.
A few drops of superglue, and it's all solid.
I had similar problems with the squirrels here. The solution was the 12-bore
shotgun. Unfortunately, that didn't deal with the mice, who were much more
elusive but did more damage. The cat solved that one.
One I rather fancied trying was to treat the inside of the conduit with Nitrogen
Triiodide (NI3). Avoids repeat attacks by any individual critter.
Keith
--
Keith Jillings
G3OIT GW3OIT G-UTSY at EGMC
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|