To: | i4jmy@iol.it, herbs@vitelcom.net |
---|---|
Subject: | Re:Topband: To Balun or not to Balun that is the question. |
From: | "Donald Chester" <k4kyv@hotmail.com> |
Date: | Wed, 31 Dec 2003 09:45:07 +0000 |
List-post: | <mailto:topband@contesting.com> |
From: "i4jmy@iol.it" <i4jmy@iol.it> By the way, depending the diameter of the coil, line lenght, and coil position, I'm afraid those 6 turns are not enough to have a good choke on 20m.Expecially in cases where a choke is not on a current node, 10 ten times ratio between reactance and 50 Ohm doesn't make at all a good one. It depends on what you are using the balun for. I found 6 turns to be effective on 40m. in the shack between transmitter and ant changeover relay. I had an rf feedback problem on that band, that wouldn't go away no matter what (copper ribbon ground strap, 1/4L ground radials under the floor, rf chokes, bypass caps, etc). The 6-turn balun cured the problem immediately. Don K4KYV _________________________________________________________________ Tired of slow downloads? Compare online deals from your local high-speed providers now. https://broadband.msn.com _______________________________________________ Topband mailing list Topband@contesting.com http://lists.contesting.com/mailman/listinfo/topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: To Balun or not to Balun that is the question., Tom Rauch |
---|---|
Next by Date: | Topband: DX window, Bill Tippett |
Previous by Thread: | RE: Topband: To Balun or not to Balun that is the question., Jaime P.Ullívarri |
Next by Thread: | Re: Topband: To Balun or not to Balun that is the question., i4jmy@iol.it |
Indexes: | [Date] [Thread] [Top] [All Lists] |