| To: | <jbwolf@comcast.net>, "'Topband Reflector'" <topband@contesting.com> |
|---|---|
| Subject: | Re: Topband: Shared Apex Loop Array |
| From: | "JC N4IS" <n4is@comcast.net> |
| Date: | Mon, 10 Feb 2014 21:54:01 -0500 |
| List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
Hi Jim >> The antenna geometry indicates that it should perform similar to a Waller Flag *under the same conditions*. << The perform under same conditions is expected, however the WF RDF is between 11.5db to 12 db. How that compares with a 8.5db RDF antenna? I would say two antennas with the same RDF should perform similar. The WF is a different antenna, it's a rotatable pair of loaded loops. Each loop is open and loaded with a resistor. Regards JC N4IS _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: DX Summit connection problems, Gary K9GS |
|---|---|
| Next by Date: | Re: Topband: Shared Apex Loop Array, Steve Flood |
| Previous by Thread: | Re: Topband: Shared Apex Loop Array, bruce whitney |
| Next by Thread: | Re: Topband: Shared Apex Loop Array, Steve Flood |
| Indexes: | [Date] [Thread] [Top] [All Lists] |