http://www.forestry-suppliers.com/product_pages/Products.asp?mi=68571
73...Stan, K5GO
Sent from my iPad
> On Sep 2, 2014, at 2:14 PM, "Richard (Rick) Karlquist"
> <richard@karlquist.com> wrote:
>
>> On 9/2/2014 10:06 AM, Jim Brown wrote:
>>
>> I'm supporting high dipoles fed by RG11 up 120 ft with the 5/16-in stuff
>> that DX Eng sells. They are run though top-grade pulleys, tied down at
>> the base of one tree, 100# of dry sand at the base of the other tree.
>> The major issue with the rope is wear -- the pulleys must be first grade
>> to avoid abrasion, which WILL eventually break the rope.
>
> Can anyone recommend some first grade pulleys? I am looking for
> something bigger than what they have at hardware stores, 3 or 4
> inch.
>
> Rick N6RK
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|