Towertalk
[Top] [All Lists]

[TowerTalk] How bend aluminum tubing

To: <towertalk@contesting.com>
Subject: [TowerTalk] How bend aluminum tubing
From: SavageBR@aol.com (SavageBR@aol.com)
Date: Sat, 15 Aug 1998 12:43:30 EDT
Steve
Using CERABLEND is the way to go. If you cannot find it, try packing wet sand
in the tubing and then bending with a Hickey.

Bruce  AA4Z

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>