In a message dated 99-01-12 18:20:27 EST, jreid@aloha.net writes:
<< There are three rivet holes in the inner,
longer tube, very near the end of the
outer tube, near the center of the
long,48" tube.
One of these assemblies is labeled A,
other B. But unlike every other tube
which came in the C4 kit, there is
no element number.
Per my measurements, all eight elements on
the C4 are the correct length, so I have
no idea for what these two left over assemblies
might be included. >>
Just put a C-4SXL together and had the same thing. They were apparently
extra but why? Haven't talked to Tom about it. My element measurements were
also fine without them.
Cheers, Steve K7LXC
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|