At 07:50 AM 2/10/99 -0700, you wrote:
>
>Serious climbers wouldn't be caught dead (or alive) using a tower
>climbing belt for climbing. A real climbing harness has zero leather,
>and no d-rings or latches to fail or come undone. Personally, tower
>belts scare the heck out of me, and I can only imagine that the people
>using them for a living don't know that there's better equipment out
>there. Go to any mountaineering store and check out the climbing
>harnesses. You'll see the difference right away.
>
>--Dave
>K0QE
>
I totally agree Dave. I could only imagine the pain taken from a fall
wearing a belt. You may not hit the ground if your wearing one but you may
not walk again either. Buy your tools from a tool company not your life
saftey products. You can purchase a very good class II harness for about
the same price as a good leather belt. I personally prefer to wear a full
body class III harness. (This is not a fall arrest harness). There are
usually at least 4 points of attachment on these harnesses. These are the
ratings that you want to look for when purchasing a harness.
There IS much better equipment out there. A good source for a wide range of
equipment suitable for tower work is
The California Mountain Company
CMC
1-800-235-5741
www.cmcrescue.com
or
The ROCO Corporation
1-800-647-7626
www.RocoRescue.com
Both will mail catalogs on request.
KK5LC
Shane Dugas
Prairieville, LA
Shane@eatel.net
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|