To: | <towertalk@contesting.com> |
---|---|
Subject: | [Towertalk] Mixing EHS and Phillystran |
From: | n4zr@contesting.com (Pete Smith) |
Date: | Tue, 16 Apr 2002 21:21:15 -0400 |
At 04:21 PM 4/16/02 -0600, n4kg@juno.com wrote: >N4ZR has recommended at least 1/2 WL of insulated guy >(of the Lowest Frequency Antenna on the tower ) >between the top to the tower and a continuous >conductive guy wire. That's 35 ft for 20M. >I'd go with at least 50' for the top guy and maybe >even the next lower guy (or ALL guys). I don't recall that. I was advised that 1/4 wave was minimal and reported anecdotally that when I went from 21 feet of nonconductive guy to my entire top guy being Philly, my 40m yagi on top seemed to work better. |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [Towertalk] anti-seize ?, K7LXC@aol.com |
---|---|
Next by Date: | [Towertalk] driving ground rods, n0tt1@juno.com |
Previous by Thread: | [Towertalk] Mixing EHS and Phillystran, <k4oj@tampabay.rr.com (Jim White) |
Next by Thread: | [Towertalk] Mixing EHS and Phillystran, n4kg@juno.com |
Indexes: | [Date] [Thread] [Top] [All Lists] |