Buy a NEW indicator pot from MFJ.
It's a simple process to change it out.
There is a copper flange that stucks up
from the POT which engages a formed
extension in the TOP of the rotor housing.
Did you check to see the flange was properly
aligned with the housing before assembly?
Tom N4KG
On Thu, 18 Apr 2002 12:54:34 -0500 "Nelson Moyer" <ku0a@mchsi.com>
writes:
> I lost the directional indication on my T2X, brought it down, and
> found the
> wiper arm had worn down and dropped off of the rheostat windings.
> Being
> thrifty, I soldered a short piece of #8 wire to the end of the wiper
> arm,
> filed it down on top the clear the upper stop, and checked it with
> the
> controller. The directional indication works when I rotate the arm
> manually,
> but the arm does not turn with the rotor motor on. Any suggestions
> on what
> do do next, besides send it out for repair?
>
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
|